Hamskea Everest Arrow Rest w/ Universal Mount

Description

All metal construction

• Billet machined components for strength.

Limb Actuated multi-configurable rest

• Can be attached to the bottom or top limb without needing additional parts.
• Can be set up as Cable Fall-Away if needed/desired.

Two stainless-steel ball bearings

• Sealed bearings that will not require maintenance.
• Smooth consistent actuation in any weather conditions.
• Tight tolerances that don’t change over time.
• Rests that use bushings will have slop from the factory, and it gets worse over time.

Over molded launcher and 2-piece containment bracket

• Launcher doesn’t require felt for a quiet draw cycle.
• 2-piece containment bracket.
• Nylon core with a softer overmold.
• Overmold containment bracket contains your arrow before the shot without any noise.
• Can remove the top containment bracket if desired while still having the bottom containment bracket.

Rebound Dampener

• Durable design eliminating the need for the Dampening Coil Spring
• Manages launcher flutter, minimizes shock transferred from the limb to the rest, and is quiet during the shot.

Zero Tolerance Technology

• No slop in the carrier rod ensuring accuracy and repeatability.

Adjustable Launcher Spring Tension

• Fine tune your rest to better fit the weight of your specific arrow.
• Allows the launcher to flex with the arrow as it paradoxes during the shot instead of the arrow pushing off of the launcher.

Micro-Launcher Angle Adjustment “MLA” Technology

• New technology that allows continuous adjustment to the launcher angle allowing customers to micro-tune the launcher stopping points.
• Up-stop and down-stop are independent of each other.
• Nylon Ball prevents the screw from moving during tuning or test.
• Separate locking set screws will lock the adjustment screws after adjustment is complete.

Standard windage and elevation adjustment for faster adjustment.